耶拿ICP-OES PQ9000全线耗材配件现货包邮种类齐全

418-10-405-175

Nebulizer tubing for organic samples, 1.3mm AD x 0.25mm ID x 700mm, with UniFit-connector for nebulizer 0.1mL/min

418-10-405-176

Nebulizer tubing for Standard Kit, Organic Kit, HF-Kit, 1.3mm AD x 0.5mm ID x 700mm, with EasyFit-connector for Standard Kit, Organic Kit, HF Kit for nebulizer 1mL/min, 0.4 mL/min

418-10-405-177

Nebulizer for tubing salt kit, 1.3mm AD x 0.75mm ID x 700mm, with EasyFit-connector for nebulizer high salt content, 2.0 mL/min

418-13-400-015

PTFE Waste tubing (Extension; 1m; 1.6x1.0mm)

418-13-410-392

Set of PVC-pump tubing for sample (black/black), for aqueous solutions, acids, base, tubings used in Standard Kit, HF Kit and Salt Kit

418-13-410-393

Set of PVC-pump tubing for waste (red/red), for aqueous solutions, acids, base, tubings used in Standard Kit, HF Kit and Salt Kit

418-13-410-528

PU pump tubing for sample (black/black), Application for organic solvents (Kerosin, Ethanol), tubing used in Organic Kit

418-13-410-529

PU tubing for waste (red/red), Application for organic solvents (Kerosin, Ethanol), tubing used in Organic Kit

418-13-410-530

Set pump tubing viton for sample (black/black), Application for volatile organic solvents (including naphtha, petrol, coolants and aromatic solvents)

418-13-410-531

Set pump tubing viton for waste (red/red), Application for volatile organic solvents (including naphtha, petrol, coolants and aromatic solvents)

418-13-410-541

Set pump tubing autosampler (grey/grey)

418-13-410-594

Set PVC pump tubings waste (red/red) widened, for aqueous solutions, acids and bases, allows easier and faster connections to all tubing, pack 6 pieces

418-13-410-595

Set PVC pump tubings sample (black/black) widened, for aqueous solutions, acids and bases, allow easier and faster connections to all tubing, pump tubing for reducing agent in hydride system, pack 6 pieces

418-13-410-596

Inline Filter for tubing (1.3mm), improves the performance and life time of the V Shuttle Torch by lowering the risk of introducing particles, component to be installed between auto sampler, peristaltic pump or spray chamber, recommended for samples containing undissolved solids as well as high salt contents

418-13-410-698

Set pump tubing Fluoro rubber ASPQ 3300 (gray/gray), pump tubing organic solvents rinse pump ASPQ3300 pack 6 pieces

418-88097-0

Set tube connector nebulizer gas, to connect the gas tube to the nebulizer

418-13-410-408

Injector 1.0mm; Quartz glass, Recommended for petrochemical and organic samples

418-13-410-412

Injector 2.0mm, Alumina, Recommended for hydrofluoric acid (HF)-containing samples

418-13-410-404

Injektor 2.0mm, Quartz glass, Recommended for aqueous samples containing acids excluding HF, bases and high salt contents

418-13-410-492

Inner tube (Alumina ceramic), Recommended for hydrofluoric acid (HF)-containing samples

418-13-410-401

Inner tube, Quartz glass, Recommended for aqueous samples containing acids excluding HF, bases and high salt contents as well as for petrochemical and organic samples

418-13-410-491

Outer tube (Syalon), Recommended for hydrofluoric acid (HF) containing samples as well as for aqueous samples containing high salt contents to enhance precision, long-term stability and life time of the plasma torch.

418-13-410-402

Outer tube, Quartz glass, Recommended for aqueous samples containing acids excluding HF, bases and high salt contents as well as for petrochemical and organic samples

418-13-5850-011-20

Set O-rings for demountable torch, ORGANIC KIT

418-13-5850-010-20

Set O-rings for demountable torch, STANDARD KIT, HF KIT, SALT KIT

418-13-5850-009-20

Set O-rings torch body

418-13-410-400

Torch body, Quartz, For Plug-and-play installation of inner tube, outer tube and injector of the demountable V Shuttle Torch

418-13-5850-925-10

Torch Bonnet, large

418-13-5850-001-20

V Shuttle (PTFE) with Torch Body, V Shuttle with internal torch body of demountable torch (quartz) suitable for all applications, O-rings must be ordered separately depending on samples (aqueous/organic)!

418-13-410-537

O-Ring for One-piece Torch, 20x2, V-Shuttle top

418-13-410-538

O-Ring for One-piece torch, 13x3,5, V-Shuttle bottom; 2pcs required

418-13-410-555

O-Ring one-piece torch for aqueous solution, O-Ring connector ball joint adapter

418-13-410-612

O-Ring one-piece torch for organic samples, O-Ring connector ball joint adapter

418-13-5850-910-14

V Shuttle with one-piece torch, quartz glass, injector 2mm, V Shuttle with non demoutable torch.

418-13-5850-922-10

one-piece torch, quartz glass, injector 2mm, Non demountable torch

418-10-406-210

Adapter for Inline Filter for tubing (1,3mm), For cleaning of the filter with cleaning tool

418-13-410-482

concentric nebulizer, Borosilicate glass, 0.1mL/min, Nebulizer with enhanced nebulization efficiency and reduced sample consumption suitable for the analysis of aqueous samples and petrochemicalorganic samples (TDS tolerance typically up to 15 %).

418-13-410-480

concentric nebulizer, Borosilicate glass, 0.4mL/min, Nebulizer used in ORGANIC KIT, suitable for petrochemicalorganic samples (TDS tolerance typically up to 15 %).

418-13-410-406

concentric nebulizer, Borosilicate glass, 1mL/min, Concentric nebulizer used in STANDARD KIT, suitable for aqueous and organic applications (TDS tolerance, typically up to 5%, high tolerance to particulates up to 75渭m)

418-13-410-597

concentric nebulizer, PFA, 1mL/min, nebulizer suitable for aqueous samples containing more than 5 % hydrofluoric acid (HF)

418-13-410-598

parallel path nebulizer, PFA, 1mL/min, Nebulizer providing enhanced signal sensitivity and lowest detection limits for aqueous samples containing concentrated mineral acids including hydrofluoric acid (HF) > 5% (TDS tolerance typically up to 10%).

418-13-410-663

Connector for nebulizer 4mm, Argon connector for nebulizer tubing to nebulizer (acid resistant)

418-13-410-420

Cleaning tool for concentric nebulizer, Recommended cleaning tool for nebulizer used in STANDARD KIT, ORGANIC KIT and SALT KIT

418-10-405-165

Cleaning tool for concentric nebulizer HF KIT, Recommended cleaning tool for nebulizer used in HF KIT

418-10-405-526

Nebulizer cleaning tool O-rings, 3 x O-rings for nebulizer cleaning tool

418-13-410-590

Transfer Tube for Isomist, supplies for Isomist, length 240mm

418-10-406-043

Cyclonic spray chamber for HS PQ, Borosilicate glass, Spray chamber with two inlets for hydride injector, PTFE and concentric nebulizer

418-13-410-416

Cyclonic spray chamber, 20 mL, Borosilicate glass, Spray chamber for reduced sample consumption and wash-out time (reducing , memory effects) suitable for aqueous, petrochemical and organic samples for sample aspiration from 0.02 to 0.4 mL/min

418-13-410-415

Cyclonic spray chamber, 50 mL, PTFE, Spray chamber used in HF KIT, suitable for strong mineral acids including hydrofluric acid (HF), for sample aspiration from 0.2 - 3.0 mL/min

418-13-410-407

Cyclonic spray chamber, 50mL, Borosilicate glass, Spray chamber used in STANDARD KIT, suitable for aqueous, petrochemical and organic samples for sample aspiration from 0.2 to 3.0 mL/min

10-5090-012-20

Set sample aspiration tubing AIM 3300

10-5090-014-20

holder cannula carbon with nut

10-5090-015-20

cannula carbon with nut

418-10-405-149

Tube anchor (X-axis), AS PQ 3300

418-10-405-155

Kit wash reservoir, AS PQ 3300

418-10-405-328

Standard Rack Kit, 6 Position; 50 mL tubes, 30mm ID, metallic rack for autosampler AS QP 3300 and SPS3

418-10-405-336

Sample Probe, Carbon; for sampler AS PQ 3300, SPS-3

418-10-5090-012-20

Set sample aspiration tubing

418-10-5090-014-20

holder cannula carbon with nut

418-10-5090-015-20

cannula carbon

418-88108-0

carbon fibre probe for ASPQ3300, 0.5mm id, teflon sleeved

418-88109-0

carbon fibre probe for ASPQ3300, 0.8mm id, teflon sleeved

418-88110-0

carbon fibre probe for ASPQ3300, 1.0mm id, teflon sleeved

418-10-405-166

Waste tubing for spray chamber, 1,3mm OD x 0,75mm IDx700mm, mit EasyFit-connector

418-88098-0

Cetac Sample Probe, Carbon, Sample probe 0.5mm ID x 108" (blue band) for Cetac autosampler

418-88107-0

Cetac sample probe 0.8mm, sample probe 0.8mm id (red band) for Cetac ASX 5XX autosampler

418-88111-0

Cetac ASX560 Rinse station, Rinse station for autosampler CETAC ASX560

407-400.057

Pack of 100 pieces PP- sample vials, 15 mL

407-402.926

Pack of 30 pieces PP- sample vials, 50 mL

418-10-405-163

Sample Rack ICP, 60 positions; 15 mL tubes, 18 mm ID, Sample Rack for autosampler AS PQ 3300, Cetac ASX-Sxx, SPS3 and ESISD

418-10-405-164

Sample Rack ICP, 21 positions; 50 mL tubes, 30 mm ID, Sample Rack for autosampler AS PQ 3300, Cetac ASX-Sxx, SPS3 and ESISD

407-10-1700-101-11

Bottle reductant, 1L

418-10-1700-167-11

check valve, complete, Argon connection with check valve for HS PQ and HS PQ Pro

418-13-410-416

Cyclonic spray chamber, 20 mL, Borosilicate glass, Spray chamber for reduced sample consumption and wash-out time (reducing , memory effects) suitable for aqueous, petrochemical and organic samples for sample aspiration from 0.02 to 0.4 mL/min

418-13-410-595

Set PVC pump tubings sample (black/black) widened, for aqueous solutions, acids and bases, allow easier and faster connections to all tubing, pump tubing for reducing agent in hydride system, pack 6 pieces

418-13-410-617

Set PVC pump tubings waste hydride system (violet/orange), for aqueous solutions, acids and bases, allow easier and faster connections to all tubing, pack 6 pieces

418-13-410-343

Axial window - O-Ring 22x2

418-13-5850-682-00

Axial window, quartz

418-13-410-403

Ball Joint Adaptor, Polypropylene with 2 different O-rings

418-13-410-349

Air filter element for inlet air filter

418-13-5850-340-10

Filter pad plasma chamber

418-13-410-398

hook wrench Cone

418-13-5850-307-10

HS-deflector spring

418-13-410-593

KIS Kit for STANDARD KIT, ORGANIC KIT, SALT KIT, Recommended for the online introduction of an internal standard into the spray chamber without wet-chemical sample preparation.

418-13-410-592

KIS-HF Kit for HF-KIT, Recommended for the online introduction of an internal standard for HF-containing samples into the spray chamber without wet-chemical sample preparation.